Field Test Instrumentation
Pictured below are just some of the many field test instruments with which our technicians are equipped. All of Griffin's field test instruments undergo NIST traceable factory calibration on an annual basis.
Shortridge ADM-870-C Multi Meter
Airflow AV-6 Axial Vane Anemometer
TSI Rotating Vane Anemometer
Airflow TA-5 ThermoAnemometer
AMETEK 172-C Optical Tachometer
Omega HHT41 Strobe Scope
Polysonics DCT7088 Protable Transit Time Flow Meter
Shown with standard and custom built high temperature tranducer set.
UE Ultraprobe 10000 Ultrasonic Detector
This
instrument can be used to locate compressed gas and air leaks, steam
trap surveys, building or vessel leakage, transformer condition
monitoring, bearing analysis and high voltage switchgear arcing.
Shortridge ADM-870-C Meter
Jim Griffin, PE / Vice President & NEBB Certified TAB Supervisor, using a Shortridge ADM-870-C meter mounted to Shortridge's 8400 series back pressure compensating capture hood on one of Griffin's custom built hood stands.
Shortridge 870-C Meter
Dean Lymer, NEBB Certified TAB Technician, using Shortridge 870-C meter during a pitot traverse of a supply air duct.
Shortridge ADM-870 & 8400 Series Capture Hood
Shown on Griffin's custom made hood stand and cart.
Shortridge 870-C Meter and 8400 Capture Hood
Shown mounted on Griffin's custom built hood stand.